EMC E20-597 exam practice questions and answers

ITCertKing's EMC E20-597 exam training materials is no other sites in the world can match. Of course, this is not only the problem of quality, it goes without saying that our quality is certainly the best. More important is that ITCertKing's exam training materials is applicable to all the IT exam. So the website of ITCertKing can get the attention of a lot of candidates. They believe and rely on us. It is also embodied the strength of our ITCertKing site. The strength of ITCertKing is embodied in it. Our exam training materials could make you not help recommend to your friends after you buy it. Because it's really a great help to you.

We will not only ensure you to pass the exam, but also provide for you a year free update service. If you are not careful to fail to pass the examination, we will full refund to you. However, this possibility is almost not going to happen. We can 100% help you pass the exam, you can download part of practice questions from ITCertKing as a free try.

Why we are ahead of the other sites in the IT training industry? Because the information we provide have a wider coverage, higher quality, and the accuracy is also higher. So ITCertKing is not only the best choice for you to participate in the EMC certification E20-597 exam, but also the best protection for your success.

Exam Code: E20-597
Exam Name: EMC (Backup and Recovery Specialist Exam for Storage Administrators)
One year free update, No help, Full refund!
Total Q&A: 168 Questions and Answers
Last Update: 2013-12-25

The ITCertKing EMC E20-597 exam questions is 100% verified and tested. ITCertKing EMC E20-597 exam practice questions and answers is the practice test software. In ITCertKing, you will find the best exam preparation material. The material including practice questions and answers. The information we have could give you the opportunity to practice issues, and ultimately achieve your goal that through EMC E20-597 exam certification.

Everyone has their own life planning. Different selects will have different acquisition. So the choice is important. ITCertKing's EMC E20-597 exam training materials are the best things to help each IT worker to achieve the ambitious goal of his life. It includes questions and answers, and issimilar with the real exam questions. This really can be called the best training materials.

E20-597 Free Demo Download: http://www.itcertking.com/E20-597_exam.html

NO.1 What is the backup command specified in the EMC NetWorker client resource for EMC Centera
backups?
A.savepnpc
B.nsrdasv
C.nsrndmp_save
D.nsrsnap_vss_save.exe
Answer: C

EMC   E20-597 exam   E20-597   E20-597   E20-597

NO.2 What is a characteristic of cloud volumes in EMC NetWorker?
A.Infinitely appendable
B.Recyclable
C.Space cannot be reclaimed.
D.Data cannot be compressed or encrypted.
Answer: A

EMC pdf   E20-597   E20-597 certification training   E20-597

NO.3 A customer has the following EMC NetWorker configuration:
How many nsrlcpd processes are running on the NetWorker server?
A. 4
B. 12
C. 16
D. 0
Answer: D

EMC study guide   E20-597 exam simulations   E20-597   E20-597 demo   E20-597 test   E20-597

NO.4 What is a characteristic of VCB backups in EMC NetWorker?
A.Supports image and file-based backups
B.Requires a NetWorker client on each virtual machine
C.Requires a storage node on the VCB backup proxy
D.Does not support LAN-free backup
Answer: A

EMC original questions   E20-597   E20-597   E20-597   E20-597 exam simulations   E20-597

NO.5 You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives.
Two drives each are dedicated to the server and storage node. A new Celerra has been added to the
network with 500 GB of data. What must be done to back up the data on the Celerra?
A. Create a storage node on the Celerra and select NDMP in the "type of storage node" field.
B. Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this
device.
C. Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or
storage node.
D. Create an NDMP backup pool and add this pool to a save group with other clients.
Answer: C

EMC exam prep   E20-597 practice test   E20-597

NO.6 A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC Disk
Library. To ensure that the embedded storage node is used to read the data during clone operations, what
is required?
A.Add the Disk Library engine's hostname to the "Read hostname" field in the device properties.
B.Set the clone storage node value for the embedded storage node client resource to itself.
C.Create a client for the embedded storage node.
D.Create a clone pool and assign the appropriate rights to it.
Answer: A

EMC test answers   E20-597   E20-597   E20-597   E20-597

NO.7 When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service
must be restarted on the client for the change to take effect?
A. nsrd
B. nsrexecd
C. nsrindexd
D. nsrdb
Answer: B

EMC   E20-597 test answers   E20-597

NO.8 A customer using EMC NetWorker Power edition attempts to set server parallelism to 96. When saving
the changes they notice that the server parallelism reverts back to 64.
What action needs to be taken to set server parallelism to 96.?
A. Set device max sessions to 96.
B. Configure group parallelism to 96.
C. Enable diagnostic mode.
D. Add NetWorker Storage Node Enabler Code.
Answer: D

EMC exam dumps   E20-597   E20-597

NO.9 What is a characteristic of EMC NetWorker SnapImage module backups?
A.Block-level backups of dense file systems
B.Fast block-level backups of a file system mounted on a proxy server
C.Immediate recovery of a file system from a persistent snapshot
D.SAN-based image-level backup and recovery of file systems
Answer: A

EMC exam   E20-597   E20-597   E20-597 exam simulations

NO.10 Refer to the exhibit. An EMC NetWorker customer has two data zones, A and B, with autochanger AC1
and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is
configured as a shared autochanger.
Two drives of AC2 are statically assigned. How many drives of AC2 can be shared in Zone A?
A. 2
B. 0
C. 4
D. 6
Answer: B

EMC exam   E20-597   E20-597   E20-597 test questions   E20-597

NO.11 An EMC NetWorker customer wants to perform a complete backup of a SQL server with three
databases. Which save set name should be used?
A.MSSQL:DB
B.MSSQL:*
C.MSSQL:ALLDB
D.MSSQL:
Answer: D

EMC   E20-597   E20-597

NO.12 You have successfully configured three SQL servers for backup with the EMC NetWorker Module for
SQL. These servers are configured as follows:
Scheduled backup of the group shows that all SQL data from the three servers was successfully backed
up. However, when you attempt to recover the SQL data using the standard NetWorker user GUI, you
only see file system data to recover.
What must you do to recover the SQL data backed up with the NetWorker module?
A. Modify the browse time within the NetWorker user GUI to show the period for which you want to
recover.
B. Use the Microsoft SQL Server native tools to recover the data from NetWorker.
C. Modify the save set to include an instance or database name after MSSQL:.
D. Launch the NetWorker User for SQL.
Answer: D

EMC exam simulations   E20-597 test questions   E20-597   E20-597 certification

NO.13 Which Microsoft VSS component is responsible for creation and maintenance of a shadow copy?
A. Requestor
B. Provider
C. Writer
D. Interceptor
Answer: B

EMC   E20-597 study guide   E20-597 original questions   E20-597 exam simulations

NO.14 Refer to the exhibit. In an EMC NetWorker environment, the storage node sn1 is down for maintenance.
According to the client properties, what happens when the backup of the client starts?
A. The backup data will be sent to the storage node sn2.
B. The backup will fail as the storage node sn1 is not available.
C. The backup data will be sent to any available storage node.
D. The backup data will be sent to the NetWorker server.
Answer: A

EMC   E20-597   E20-597   E20-597 pdf

NO.15 What is a characteristic of how the EMC NetWorker modules integrate with native applications?
A. The developer of the native application provides a NetWorker module to allow for protection of their
application with NetWorker.
B. The NetWorker module runs on the NetWorker server and acts as an intermediary for data coming
from the NetWorker client module.
C. The NetWorker module acts as an intermediate layer between NetWorker and the native application.
D. The NetWorker module always takes the place of the standard NetWorker client allowing for backup of
applications and file systems.
Answer: C

EMC   E20-597   E20-597   E20-597 exam prep

ITCertKing offer the latest C_TSCM62_65 exam material and high-quality HP2-Z24 pdf questions & answers. Our 00M-620 VCE testing engine and 70-460 study guide can help you pass the real exam. High-quality 000-122 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/E20-597_exam.html