JN0-694 practice tests

ITCertKing's providing training material is very close to the content of the formal examination. Through our short-term special training You can quickly grasp IT professional knowledge, and then have a good preparation for your exam. We promise that we will do our best to help you pass the Juniper certification JN0-694 exam.

If you buy ITCertKing Juniper JN0-694 exam training materials, you will solve the problem of your test preparation. You will get the training materials which have the highest quality. Buy our products today, and you will open a new door, and you will get a better future. We can make you pay a minimum of effort to get the greatest success.

Exam Code: JN0-694
Exam Name: Juniper (Enterprise Routing and Switching Support, Professional (JNCSP-ENT))
One year free update, No help, Full refund!
Total Q&A: 36 Questions and Answers
Last Update: 2013-11-20

We will free provide you part of the exercises of Juniper certification JN0-694 exam on the Internet to let you try to test our product's quality. After your trail you will find ITCertKing's exercises is the most comprehensive one and is what you want to.

If you are still troubled for the Juniper JN0-694 certification exam, then select the ITCertKing's training materials please. ITCertKing's Juniper JN0-694 exam training materials is the best training materials, this is not doubt. Select it will be your best choice. It can guarantee you 100% pass the exam. Come on, you will be the next best IT experts.

JN0-694 Free Demo Download: http://www.itcertking.com/JN0-694_exam.html

NO.1 Your Layer 2 network uses VLAN IDs 100 through 400 and you are required to load-balance
these VLANs between two different root bridges. You are currently using the default RSTP settings
and notice that all VLANs are using the same root bridge.
How do you ensure the VLANs are load-balanced between two root bridges?
A. Configure MSTP with two MSTI regions and split the VLAN range between them.
B. Configure VSTP with two VLAN groups and split the VLAN range between them.
C. Configure two RSTP instances and split the VLAN range between them.
D. Configure STP and RSTP and split the VLAN range between them.
Answer: A

Juniper   JN0-694   JN0-694 demo   JN0-694   JN0-694   JN0-694

NO.2 You observe that a router is using an unusually high amount of CPU cycles.
You determine that continuous SPF calculations in OSPF are being performed.
What are two reasons for this problem? (Choose two.)
A. The wrong authentication keys between the OSPF neighbors are used.
B. The interface MTU is mismatched between the OSPF neighbors.
C. There are duplicate router IDs within the OSPF area.
D. An OSPF adjacency is flapping.
Answer: C,D

Juniper test answers   JN0-694   JN0-694 exam prep   JN0-694

NO.3 Your switch is experiencing a problem where a port that should have only one host connected
occasionally shows that multiple MAC addresses are being learned.
Which configuration setting would ensure that no extra hosts can join the network using this switch
port?
A. mac-limit
B. no-mac-learning
C. persistent-learning
D. bpdu-block-on-edge
Answer: D

Juniper demo   JN0-694 test answers   JN0-694 demo   JN0-694 test

NO.4 You are having problems redistributing RIP routes into OSPF. Your Junos device has the
following configuration:
[edit protocols ospf]
user@router# show
import my-policy;
area 0.0.0.0 {
interface ge-0/ 0/ 0.0;
interface ge-0/ 0/ ;
interface ge-0/ 0/ {
passive;
}
}
What would resolve the problem?
A. Apply my-policy as an export policy under the [edit protocols rip] hierarchy.
B. Apply my-policy as an import policy under the [edit protocols rip] hierarchy.
C. Apply my-policy as an export policy under the [edit protocols ospf] hierarchy.
D. Use the area-range parameter instead of a routing policy.
Answer: D

Juniper dumps   JN0-694   JN0-694 exam dumps   JN0-694 test questions

NO.5 You are implementing Q-in-Q tunneling on an EX Series switch. You want the tunnel to support
all C-VLANs; however, only some VLANs are able to send traffic across the tunnel.
Switch-1 has the following configuration:
[edit vlans]
user@Switch-1# show
v100 {
vlan-id 100;
interface {
ge-0/ 0/ 0.10;
ge-0/ 0/1.20;
}
dot1q-tunneling {
customer-vlans [ ];
}
}
What would solve this problem?
A. Add family ethernet-switching to the tunnel-side interface on Switch-1.
B. Implement RSTP .
C. Q-in-Q tunneling will not work in this scenario; use a Layer 2 VPN instead.
D. Remove the customer-vlans statement.
Answer: C

Juniper   JN0-694   JN0-694   JN0-694 test questions   JN0-694   JN0-694

NO.6 You are troubleshooting a problem where an OSPF adjacency between two neighboring
routers will not form.
What are two reasons for this problem? (Choose two.)
A. One or both of the connected interfaces are missing the family inet statement.
B. One or both of the connected interfaces are missing the family iso statement.
C. The connected interfaces are not on the same subnet.
D. Another IGP is running on one or both of the routers, overriding OSPF.
Answer: B,D

Juniper exam dumps   JN0-694   JN0-694   JN0-694 exam   JN0-694

NO.7 Two neighboring routers are able to form an OSPF adjacency, but are not able to establish an
IBGP neighborship.
What are two reasons for the IBGP neighborship problem? (Choose two.)
A. One of the devices has a misconfigured BGP peer address.
B. One or both of the connected interfaces are missing the family iso statement.
C. OSPF has a lower route preference than BGP .
D. A firewall filter on one of the interfaces is blocking TCP traffic.
Answer: B,C

Juniper exam simulations   JN0-694 exam dumps   JN0-694   JN0-694   JN0-694   JN0-694

NO.8 Your Junos device is dropping certain traffic flows, while allowing other traffic flows to pass
through the device unaffected.
Which CoS component is causing this problem?
A. BA classification
B. RED
C. MF classification
D. Rewrite rules
Answer: D

Juniper   JN0-694 exam simulations   JN0-694   JN0-694 dumps

ITCertKing offer the latest HP0-J62 exam material and high-quality 156-315.13 pdf questions & answers. Our 1z0-593 VCE testing engine and PMI-100 study guide can help you pass the real exam. High-quality MB6-889 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.itcertking.com/JN0-694_exam.html